Table of Contents
Advertisement
Chapter 7. ETHERNET-BASED
7.1
Overview
The CDM-425 Advanced Satellite Modem base unit is equipped with four RJ-45 10/100 BaseT
Ethernet connectors, subject to the following conditions:
•
When Dedicated Management is disabled, you may use any port for Ethernet-based
remote product management (monitor and control) purposes.
•
When Dedicated Management is enabled, you may use only that specific port for remote
monitor and control (M&C) purposes.
7.2
Ethernet Management Interface Protocols
The user PC facilitates access to Ethernet-based remote M&C of the CDM-425 Advanced
Satellite Modem through three separately operated protocols:
•
Simple Network Management Protocol (SNMP) – This requires a user-supplied
Network Management System (NMS) and a user-supplied Management Information Base
(MIB) File Browser.
•
Telnet Interface – This requires use of a user-supplied terminal emulation program such
as HyperTerminal (for use with the remote control protocol) or PuTTY (for use with the
Telnet Command Line Interface), installed on the user PC.
•
HTTP (Web Server) Interface – This requires a compatible user-supplied web browser
such as Internet Explorer, installed on the user PC.
Ethernet-based Remote Product Management
REMOTE PRODUCT
MANAGEMENT
7–1
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Advertisement
Table of Contents
Need help?
Do you have a question about the CDM-425 and is the answer not in the manual?
Questions and answers