Redundancy Page - Comtech EF Data CDM-425 Installation And Operation Manual

7.5.4.6

Redundancy Page

Take note of the following redundant switch information, as it pertains to IP
Packet Processor Redundancy:
•
•
•
Read your pertinent switch Installation and Operation Manuals for detailed
information on using the CDM-425 in a redundancy configuration.
Ethernet-based Remote Product Management
1:1 Redundancy is supported using either a CRS-170A L-Band 1:1
Redundancy Switch or a CRS-180 70/140 MHz 1:1 Redundancy Switch, and
a user-provided, off-the-shelf Ethernet switch.
1:N Redundancy is supported using a CRS-300 1:10 Redundancy Switch or a
CRS-500 M:N Redundancy System in 1:N mode based on the following
criteria:
Redundancy Device
CRS-300
CRS-500
Packet Processor Redundancy is supported in both 1:1 and 1:N redundant
configurations using the CRS-500 M:N Redundancy System.
Figure 7-60. Redundancy Page
CDM-425 Advanced Satellite Modem
Packet Processor Terrestrial Interface
Disabled
EIA-422/530, V.35,
Disabled
Sync EIA-232
Enabled
7–99
Revision 0
Mode
Any Any
Any
Ethernet L3 or Bridge
MN-CDM-425