Table of Contents
Advertisement
7. Next, create a temporary folder (subdirectory) on the User PC for the firmware archive
download. There are several ways to create a temporary folder on a Windows-based PC:
•
•
Updating Firmware
•
These examples use drive letter "c:". You may use any valid,
writable drive letter.
•
Typical for all tasks: Type the command without quotes, and then
press Enter to execute.
Use the Windows Desktop to create and rename the temporary folder.
Right-click anywhere on the desktop to open the popup submenu, and
o
then select New > Folder to create a temporary folder on the desktop.
Right-click on the new folder and then select "Rename" from the popup
o
submenu. Rename this folder to "temp" or some other convenient,
unused name.
Figure 4-4. Temporary Folder Using Windows Desktop
Use Windows Explorer to create and rename the temporary folder.
Select File > New > Folder to create a temporary folder. This creates
o
the new folder in the active folder.
Right-click the "New Folder" folder name, and then rename this folder to
o
"temp" or some other convenient, unused name:
Figure 4-5. Temporary Folder Using Windows Explorer
CDM-425 Advanced Satellite Modem
4–6
Revision 0
MN-CDM-425
Advertisement
Table of Contents
