Comtech EF Data CDM-425 Installation And Operation Manual page 388

Command
Number of
Parameter (Instruction
Arguments
& Qualifier)
Dedicated DMP= 1 byte,
Management 0 thru 8
Port
Ethernet 2048 EFS= 1 byte,
Frame Size 0 or 1
Host Access ACL= 1 byte,
List 0 or 1
Enable/Disabl
e
Packet PRD= 1 byte, 0 or 1
Processor
Redundancy
Precision PTP= 1 byte, 0 or 1
Time Protocol
Precision PTM= 1 byte, 0 or 1
Time Protocol
Grandmaster
Packet N/A None
Processor
Bootrom FW
Version
Packet N/A None
Processor
Image1 FW
Version
Serial Remote Control
Description of Arguments
Command or Query.
Sets or returns Dedicated Ethernet Management port in Redundancy system in the form x, where:
0=Disabled (Any Ethernet port can do management, default value)
1=Port 1
2=Port 2
3=Port 3
4=Port 4
5=Port 1 – Local only*
6=Port 2 – Local only*
7=Port 3 – Local only*
8=Port 4 – Local only*
NOTES:
1) VLAN must be Disabled to be able to select a port as Dedicated Management Port.
2) * Only LAN devices can access M&C of modem. NO remote modem access.
Command or Query.
Sets or returns 2048-byte Ethernet Frame Size function in the form x, where:
0=2048 Ethernet Frame Size is Disabled
1=2048 Ethernet Frame Size is Enabled (supported by modem with baseboard hardware Rev2 and
above)
Command or Query.
Sets or returns IP Host Access List function in the form x, where:
0=Host Access List is Disabled
1=Host Access List is Enabled
Command or Query.
Valid only when Packet Processor is installed and Enabled.
Sets or returns Packet Processor Redundancy function in the form x, where:
0=Disable Packet Processor Redundancy
1=Enable Packet Processor Redundancy
Command or Query.
Sets or returns Precision Time Protocol Feature function in the form x, where:
0=PTP is Disabled
1=PTP Enabled
Command or Query.
Sets or returns Precision Time Protocol Grandmaster function in the form x, where:
0=Grandmaster reachable over LAN
1=Grandmaster reachable over WAN
Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Bootrom firmware version.
Query only.
Valid only when Packet Processor is installed and Enabled.
Returns Packet Processor Image 1 firmware version.
8–64
CDM-425 Advanced Satellite Modem
Revision 0
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
DMP= DMP? DMP=x
DMP? (see Description of
DMP* Arguments)
DMP#
EFS= EFS? EFS=x
EFS? (see Description of
EFS* Arguments)
EFS#
ACL= ACL? ACL=x
ACL? (see Description of
ACL* Arguments)
ACL#
PRD= PRD? PRD=x
PRD? (see Description of
PRD* Arguments)
PRD#
PTP= PTP? PTP=x
PTP? (see Description of
PTP* Arguments)
PTP#
PTM= PTM? PTM=x
PTM? (see Description of
PTM* Arguments)
PTM#
N/A VS0? VS0=x
x is variable length of
text
N/A VS1? VS1=x
x is variable length of
text
MN-CDM-425