Table of Contents
Advertisement
Route Table (Edit)
This section displays and allows you to edit all current Route Table entries. Note the following:
Column
Index
Desc.
Dest.IP/Mask
Interf.
Next HOP IP
Header Comp.
Payload Comp.
Encryption
Encryption
Key
Click [Submit Changes] to save.
Add New Route
This section allows you to directly add a route entry using text boxes and drop-down lists as
described previously for the Route Table (Edit) section.
Click [Add Entry] to save. Note that, when a new route is added, the index automatically
increments to the next available number.
Delete Route
Enter Route Index to Delete, and then click [Delete Entry] once all changes have been made in
this section. The specified route entry will then be deleted from the route table.
Delete All Routes – Use with Caution
Delete All Entries? allows you to delete all entries at one time. Select No or Yes.
Click [Submit] to save changes.
Ethernet-based Remote Product Management
This is the internal table index that is automatically assigned and cannot be edited.
This label helps to maintain the network. Enter a label string in this text box. The assigned
name must be unique and cannot contain any whitespace.
Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Use the drop-down list to select the Interface as toWAN or toLAN.
Enter the desired Next Hop IP Address for toLAN routes. Note that no Next Hop entry is
needed for toWAN routes.
When the optional Header Compression FAST feature is available, use the drop-down list to
Disable or Enable operations.
When the optional Payload Compression FAST feature is available, use the drop-down list
to Disable or Enable operations.
When the optional AES Encryption FAST feature is available, use the drop-down list to
Disable or Enable operations.
With AES Encryption disabled, all routed traffic is transmitted 'in the
clear' regardless of the Encryption Key specified in the Route Table.
With encryption enabled, use the drop-down list to select Key 1 through Key 8 (assigned
using the 'Configuration | WAN | Encryption' page, Sect. 7.5.4.3.5.3) or Random Key.
You must program all eight encryption and decryption keys before
selecting Random Key – otherwise, the modem will select any of the eight
allotted keys, even if a key is currently clear (set to all zeroes).
CDM-425 Advanced Satellite Modem
Description
7–41
Revision 0
MN-CDM-425
Advertisement
Table of Contents
