Utilities: Led; Utilities: Redundancy; Utilities: Redundancy  Traffic-Ip-Addr/Range; Utilities: Redundancy  1:1 - Comtech EF Data CDM-425 Installation And Operation Manual

6.2.6.4

Utilities: LED

Front Panel LED Test: Enabled
Use the ▲▼ arrow keys to select Enable, and then press ENTER to execute a test of all of the
LEDs on the front panel. Normal operations resume upon completion of the test.
6.2.6.5

Utilities: Redundancy

Redundancy:
Traffic-IP-Addr/Range
Use the ▲▼ arrow keys to select Traffic-IP-Addr/Range, 1:1, or 1:N. Press ENTER.
6.2.6.5.1
Traffic IP address/Range
192.168.001.001/24
When the modem is part of a 1:1 or 1:N redundancy application, use the ◄ ►arrow keys to
select a digit to edit the Traffic IP Address and range.
Then, use the ▲▼ arrow keys to change that digit. Press ENTER.
6.2.6.5.2
Press ENTER key to force Unit into
Standby (1:1 only)
For use when the modem is part of a 1:1 redundancy application (e.g., via a CRS-170A L-Band or
CRS-180 70/140 MHz 1:1 Redundancy Switch) and this unit is currently Online, press ENTER to
cause the unit to switch to Standby (i.e., go Offline).
Front Panel Operation
(Enable,Disable)
Utilities: Redundancy  Traffic-IP-Addr/Range
Utilities: Redundancy  1:1
CDM-425 Advanced Satellite Modem
1:1 1:N
()
6–97
Revision 0
()
MN-CDM-425