Home > Modem > Lnb - Comtech EF Data CDM-425 Installation And Operation Manual

9.3.3.9 Home > Modem > LNB
Open the LNB page from the Modem submenu. This page provides a read-only status section for
the installed device and contains the following options:
Hot
Key
A
LNB DC Power
B LNB 10 MHz Reference
C LNB Low Current Limit
D
LNB High Current Limit
E LNB LO Frequency
F
LNB LO Mix
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Option Entry
Use the ↑↓ arrow keys to select Off, On 13V, On 18V, or On 24V
Use the ↑↓ arrow keys to select Disable or Enable
Enter a low limit value from 0 to 500 mA
Enter a high limit value from 0 to 500 mA
Enter a value as follows:
Range 1 – From 0 to 0 MHz
•
Range 2 – From 3000 to 65000 MHz
•
Use the ↑↓ arrow keys to select Low Side Mix or High Side Mix
9–38
Revision 0
MN-CDM-425