Table of Contents
Advertisement
System Account Access Information
•
Read Only, Read/Write, and Admin Names and Passwords – The factory defaults for
these user names and passwords are:
Description
Read Only
Read/Write
Admin
•
SMTP Server – Specify the mail server IP Address from where e-mail may be sent.
•
SMTP Domain Name / Destination – The Administrator can assign the SMTP Domain
Name and Destination.
o
o
Host Access List
•
Access List – The Access List allows a user to grant access via HTTP and SNMP to a
defined list of client machines.
Use the drop-down to select Enable or Disable. If Disable is selected, then any client
machine will be able to connect via HTTP and SNMP.
•
IP (#) / Mask – The Host Access List allows a user to define which remote clients can
connect when the Access List is Enabled. Each entry allows a user to specify an IP
Address and a subnet mask to define a unique class of machines that are allowed
access.
For example, if a user wanted to grant access to a PC with an IP Address of 10.10.10.1
and any PC on a subnet of 192.168.10.XXX, and then the Access List would be defined
as:
The check box before the IP (#) / Mask must be checked in order for that list
entry to take effect.
Click [Submit Admin] to save.
Ethernet-based Remote Product Management
Factory Default User Name / Password
monitor / 1234
opcenter / 1234
comtech / comtech
SMTP Domain Name – Specify the domain of the e-mail server (usually found to
the right of the '@' symbol in an e-mail address).
SMTP Domain Destination – Specify the e-mail recipient name (usually found to
the left of the '@' symbol in an e-mail address).
IP 1 / Mask – 10.10.10.1/32
IP 2 / Mask – 192.168.10.0/24
CDM-425 Advanced Satellite Modem
Typical Parameters
Name and Password fields can be any
alphanumeric combination with a
maximum length of 10 characters.
7–19
Revision 0
MN-CDM-425
Advertisement
Table of Contents
