Comtech EF Data CDM-425 Installation And Operation Manual page 368

Advanced satellite modem (18 kbps – 25 mbps)
Table of Contents

Advertisement

Command
Number of
Parameter
(Instruction
Arguments
& Qualifier)
...Global
Configuration
(cont.)
OGC Outdoor
OGC=
50 Bytes
Unit Global
Copy
Serial Remote Control
Description of Arguments
BBBCCC=CnC search delays
D=CnC PMSI mode
ee=Compressed Ethernet port speed
E=Attach summary BUC alarm to Tx
F=Attach summary LNB alarm to Rx
GGG=WAN buffer length
H=Dedicated Management Port
NOTE: Much of the CDM-425 MGC format carries over from the 600/L MGC format, except where "*"
indicates the differences. For "**ee=Compressed Ethernet port speed" Ethernet port speed is
compressed from 4 bytes in SEC command to 2 bytes in MGC. The first byte represents speed settings
for Ports 1 and ; the second byte represents speed settings for Ports 3 and 4. In each byte, character A
through Y is used to represent 25 possible combinations of two port speed. A=00, B=01, C=02, D=03,
E=04, F=10, G=11, H=12, I=13, J=14, K=20, L=21, M=22, N=23, O=24, P=30, Q=31, R=32, S=33,
T=34, U=40, V=41, W=42, X=43, Y=44.
EXAMPLE: BN is converted to 0123, that means Port 1 is AutoNeg, Port 2 is 100Full, Port 3 is 100Half,
Port 4 is 10Full.
Command or Query.
ODU Global Configuration of CDM-425, in the form shown in the Response to Query column (to the right),
where:
aa=BUC Address
b=BUC Tx Output Enable
x (spare)*
d=BUC Power Supply
e=BUC 10MHz Reference State
xxxxx (spares)
gggg=BUC Current - Low Limit
hhhh=BUC Current - High Limit
xxxx (spares)*
i=LNB Power Supply*
x (spare)*
k=LNB 10MHz Reference
lll=LNB Low Alarm Limit
nnn=LNB High Alarm Limit
FFFFFS=TX LO Frequency
fffffs=RX LO Frequency
xxxxxx (spares)
NOTES: Any unavailable parameters will be filled with x's.
same as CSD
same as CPM
see ** Note
same as ABA
same as ALA
same as WBL
same as DMP
same as BAD
same as BOE
same as BPS
same as BFR
same as BCL
same as BCH
spare
same as LPS
same as LNR
same as LNL
same as LNH
same as TLO
same as RLO
8–44
CDM-425 Advanced Satellite Modem
Revision 0
Response
Query
to
(Instruction &
Response to Query
Command
Qualifier)
OGC=
OGC?
OGC=aabxdexxxxxgggg
OGC?
OGC?n (where
hhhhxxxxixklllnnnFFFFF
OGC*
n=0 thru 9.
Sfffffsxxxxxx
OGC#
Returns the
OGC portion of 1
(Returns current OGC
of 10 stored
Configuration)
configurations)
MN-CDM-425

Advertisement

Table of Contents
loading

Table of Contents