Config: Clocks  Clk-Exten (G.703 Clock Extension) - Comtech EF Data CDM-425 Installation And Operation Manual

CONFIG: Clocks  Rx Buffer/Clock  CENTER
Selecting CENTER displays the following screen:
Press ENTER to Center the Buffer
Press ENTER or CLEAR to return to the previous menu.
6.2.1.5.3
Appendix E. CLOCK MODES
G.703 Clock Extension:
Use the ◄ ►arrow keys to select Mode or Interface. Press ENTER.
CONFIG: Clocks  Clk-Ext  Mode
G.703 Clock Extension, Mode: RxEnable
Use the ▲▼ arrow keys to select a parameter. Press ENTER. Valid settings are:
Setting
None
TxLock
RxEnable
Front Panel Operation
otherwise, Press CLEAR
CONFIG: Clocks  Clk-Exten (G.703 Clock Extension)
Mode Interface
(None,TxLock,RxEnable)
All G.703 Clock extension modes are disabled.
The CDM-425 (operating in a non-G.703 mode) locks its transmit clock timing to an externally
presented G.703 reference signal.
The CDM-425 (operating in a non-G.703 mode) synthesizes a G.703 timing reference from the
Rx satellite signal, regardless of its actual data rate.
CDM-425 Advanced Satellite Modem
DROP & INSERT (D&I)
AND
Function
6–33
Revision 0
()
()
MN-CDM-425