Comtech EF Data CDM-425 Installation And Operation Manual page 173

CONFIG: IP  SNMP  Traps
Traps:
Use the ◄ ►arrow keys to select a parameter. Press ENTER.
CONFIG: IP  SNMP  Traps  Community
SNMP Traps Community:
Comtech
Edit the SNMP Traps Community string by using the ◄ ►arrow keys to select a character. Then,
use the ▲▼ arrow keys to change that character, and press ENTER.
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and tilde ~ (ASCII code 126). Press ENTER after composing the string. All trailing spaces are
removed from the string upon entry.
CONFIG: IP  SNMP  Traps  Version
SNMP Traps Version:
SNMP-ver1
Use the ◄ ►arrow keys to select SNMP-ver1 or SNMP-ver2. Press ENTER.
CONFIG: IP  SNMP  Traps  Address
Trap IP addr #1:
000.000.000.000
Edit the SNMP Trap Destination's IP Address by using the ◄ ►arrow keys to select a digit. Then,
use the ▲▼ arrow keys to change that digit, and press ENTER.
You may disable SNMP Traps by setting both Trap IP Addresses as 000.000.000.000.
Front Panel Operation
Community Version
IP-Addr#1 IP-Addr#2
(20 chars)
(ver1,ver2)
6–55
CDM-425 Advanced Satellite Modem
()
()
()
()
MN-CDM-425
Revision 0