10.3.3.3 (Select:) Odu Menu Branches; Odu: Buc:pwrsupply+Ref (Power Supply And Reference) - Comtech EF Data CDM-425 Installation And Operation Manual

10.3.3.3 (SELECT:) ODU Menu Branches

ODU: BUC:PwrSupply+Ref
Use the ◄ ►arrow keys to select BUC:PwrSupply+Ref, LNB:PwrSupply+Ref, or FSK-control,
and then press ENTER:
ODU Menu Branch
BUC:PwrSupply+Ref
LNB:PwrSupply+Ref
FSK-control
10.3.3.3.1

ODU: BUC:PwrSupply+Ref (Power Supply and Reference)

BUC control/monitor (non-FSK):
PSU-and-10MHz
The modem provides DC power and a 10MHz reference that may be used by a BUC. Use the ◄
►arrow keys to select PSU-and-10MHz, LO-Freq, or PSUmonitor, and then press ENTER.
10.3.3.3.1.1 ODU: BUC:PwrSupply+Ref  PSU-and-10MHz Parameters
BUC supply=N/I
Alarm limits, from 0.0 to 2.0 amps ()
ODU (Transceiver, BUC, LNB) Operation
LNB:PwrSupply+Ref
Sect.
Provides menus to enter a Tx LO frequency, and to control a 10MHz
10.3.3.3.1
reference and for Power supply control and alarm limits.
Provides menus to enter an Rx LO frequency, and to control a 10MHz
10.3.3.3.2
reference and for Power supply control and alarm limits.
(Frequency Shift Keying control) Provides menus to monitor and
10.3.3.3.3
control CSAT-5060 OR KST-2000A/B or BUC settings, and LPOD
settings via Advanced FSK. The appearance of, and the functional
selections available from this nested menu are dependent on the Tx
frequency employed – 70/140 versus L-Band.
LO-freq
10MHz-ref:Off (Off,On)
CDM-425 Advanced Satellite Modem
FSK-control ()
Nested Menu Function
PSUmonitor ()
10–10
Revision 0
MN-CDM-425