Comtech EF Data CDM-425 Installation And Operation Manual page 539

LNA
•
LNA Power Enable – From the drop-down list, select On or Off.
•
LNA Fault Logic – From the drop-down list, select Summary or No Summary.
Unit
•
AGC (Automatic Gain Control) – From the drop-down list, select On or Off.
•
Reference Oscillator Adjust – Enter a value from 0-255.
•
Circuit ID – Enter a Circuit Identification name of up to 24 alphanumeric characters.
•
Lock Mode – From the drop-down list, select On or Off.
Click [Submit] to save.
ODU (Transceiver, BUC, LNB) Operation
CDM-425 Advanced Satellite Modem
10–49
Revision 0
MN-CDM-425