Table of Contents
Advertisement
6.2.4.3
Info: Mode
Info:
This screen displays the active operating interface and framing modes that were selected using
the CONFIG: Tx Mode and CONFIG: Rx Mod menus.
6.2.4.4
Info: Tx
Tx:On
VF2L
This screen displays the following information:
Item
Tx Carrier
Tx Frequency
Top line
Power
TSI
Encoder
Data Rate
Modulation
Bottom
line
FEC Rate
Scrambler
Front Panel Operation
Mode:
Tx= RS422 :None
Rx= RS422 :None
0070.0000MHz
01540.753
On, Off, or RTI
xxxx.xxxx MHz
Power Level (dBm)
TSI = Tx Spectral Inversion, I=Inverted (on), N=Not inverted (off)
FEC type: VFEC, ULL, VF2L, VF2S
xxxxx.xxx kbps (an asterisk * indicates that the data sense is inverted
BPSK, QPSK, 8-QAM, 16-QAM, 8-ARY, 16-ARY, 32-ARY
BPSK: Fixed at 0.488
QPSK: 0.533, 0.631, 0.706, 0.803
VFEC
8-QAM (FAST option): 0.576, 0.642, 0.711, 0.780
16-QAM (FAST option): 0.644, 0.731, 0.780, 0.829, 0.853
BPSK: Fixed at 0.493
ULL
QPSK: 0.493, 0.654, 0.734
BPSK: Fixed at 0.489
QPSK: 0.489, 0.537, 0.586, 0.611, 0.635, 0.660, 0.684, 0.733
8-ARY: 0.521, 0.537, 0.562, 0.586, 0.611, 0.635, 0.770, 0.684,
VF2L
or
16-ARY: 0.586, 0.611, 0.635, 0.660, 0.684, 0.708, 0.733, 0.757,
VF2S
32-ARY: 0.660, 0.684, 0.708, 0.733, 0.757, 0.782, 0.801, 0.831,
Scrm, None, or IESS
6–89
CDM-425 Advanced Satellite Modem
PWR=-AUTO
TSI=N
8ARY
.521 IESS
Configuration Setting
0.708, 0.733
0.782
0.855, 0.879
Revision 0
MN-CDM-425
Advertisement
Table of Contents
