Appendix O. Radius Client; Overview; Radius List Of Supported Rfcs (Requests For Comment; Radius Client - Comtech EF Data CDM-425 Installation And Operation Manual

Appendix O.
O.1

Overview

Ethernet-based remote monitor and control (M&C) of the CDM-425 Advanced Satellite Modem is
available through the HTTP (Web Server) Interface, SNMP, and through the issuance of remote
commands and queries via Telnet.
For CDM-425 Advanced Satellite Modems that are equipped with the Optional IP Packet
Processor, additional remote M&C access is available via the Telnet Command Line Interface
(CLI).
Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides
centralized access authentication, authorization, and management for CDM-425 Advanced
Satellite Modems.
O.1.1

RADIUS List of Supported RFCs (Requests for Comment)

RFC No.
"Remote Authentication Dial In User Service (RADIUS)"
2865
Rigby, C., Willens, S., Rubens, A., Simpson, W., June 2000
"PPP Authentication Protocols"
1334
Llloyd, B., Simpson, W.,October 1992
"PPP Challenge Handshake Authentication Protocol (CHAP)"
1994
Simpson, W., August 1996
"Microsoft PPP CHAP Extensions, Version 2"
2759
Zorn, G., January 2000
"Microsoft Vendor-specific RADIUS Attributes"
2548
Zorn, G., March 1999
Appendix O
CDM-425 Advanced Satellite Modem

RADIUS CLIENT

Description
O–1
Revision 0
MN-CDM-425