9.3.3.10 Home > Modem > Meo - Comtech EF Data CDM-425 Installation And Operation Manual

9.3.3.10 Home > Modem > MEO
Open the MEO page from the Modem submenu. This page provides a read-only status section
for the installed device and contains the following options:
Hot
Key
A
MEO Enable
B
Antenna Handover Enable
C Antenna Handover Mode
D Antenna Handover DPD
E Antenna Handover Port
F Antenna Handover Type
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Option Entry
Use the ↑↓ arrow keys to select Disable or Enable
Use the ↑↓ arrow keys to select Disable or Enable
Use the ↑↓ arrow keys to select Manual or Auto
Use the ↑↓ arrow keys to select a value of -30 to +30.
Use the ↔ to select the digit, then use the ↑↓ to change the digit.
The value address range is from 01001 to 65535.
Use the ↑↓ arrow keys to select Break Before Make or Make
Before Break
9–39
Revision 0
MN-CDM-425