Table of Contents
Advertisement
10.4.2.4.3
ODU | Status
The appearance of the 'ODU | Status' page adjusts to the type of ODU that is
configured for operation with the CDM-425.
Use this page to review read-only status windows pertaining to the current operating condition
for either the Comtech EF Data CSAT-5060 or the KST-2000A/B ODU.
10.4.2.4.3.1 ODU | Status (CSAT-5060)
Figure 10-12 shows the 'ODU | Status' page as it appears when you configure the Comtech EF
Data CSAT-5060 as the ODU. Use this page to review read-only status reports pertaining to the
ODU's Maintenance Parameters; Alarms; and the number of Unread Events in the Events Log.
ODU Selection
If you use ODUs in redundancy, you may toggle this page between the Online and Offline units.
Use the drop-down list to select CSAT #1 or CSAT #2, and then click [Select ODU]. A message
identifies the currently active unit as 'ONLINE' in the right-hand column of this section.
ODU (Transceiver, BUC, LNB) Operation
Figure 10-12. ODU | Status Page (CSAT-5060)
10–50
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Advertisement
Table of Contents
