Home > Administration - Comtech EF Data CDM-425 Installation And Operation Manual

9.3.2 Home > Administration
Open the Administration submenu from the Home menu. This submenu contains the following
options:
Hot
Configuration Page
Key
A Host Access List
B SNMP
C
Firmware (Base Modem)
D Firmware (Packet Processor)
E Reboot
F
FAST Options
G Save Modem Configuration
H Load Modem Configuration
I
Restore Factory Defaults
Press a hot key to access a configuration page. See the specified chapter section for further
configuration information. Otherwise, press [ESC] to return to the Home menu.
Telnet Command Line Interface (CLI) Operation
Function
Configure Host Access List(s)
Configure SNMP parameters and traps
View Base Modem firmware information or select image load
View Packet Processor firmware information or select image
load
Reboot the CDM-425
Set the FAST Feature Demo Mode or view currently installed
FAST options
Save up to 10 modem configurations to memory
Recall 1 of 10 modem configurations from memory
Discard any configuration changes and restore all settings
"as shipped"
9–13
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Sect.
9.3.2.1
9.3.2.2
9.3.2.3
9.3.2.3
9.3.2.4
9.3.2.5
9.3.2.6
9.3.2.6
9.3.2.7