Hub-To-Hub Using Ethernet Routers - Comtech EF Data CDM-425 Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)
Table of Contents

Advertisement

I.2.3.1.2

Hub-to-Hub Using Ethernet Routers

Figure I-5 shows two hub-sites connected with standard Ethernet traffic, using routers instead of
switches for the Ethernet connection. The routers will block the broadcasts coming from the
remote network; therefore, the creation of a broadcast storm is prevented and there is no
possibility of having a remote MAC on the Hub networks.
Appendix I
Figure I-5. Hub-to-Hub with Standard Traffic Using Routers
CDM-425 Advanced Satellite Modem
I–5
Revision 0
MN-CDM-425

Advertisement

Table of Contents
loading

Table of Contents