Table of Contents
Advertisement
For the "Min/Max" page:
From left to right:
Column
Protocol
VLAN Range
TOS
Src IP/Mask
Dst IP/Mask
Min/Max Src Port
Min/Max Dst Port
Min BW (Kbps)
Max BW (Kbps)
Ethernet-based Remote Product Management
Use the drop-down list to select the Protocol as UDP, TCP, ICMP, RTP, VOICE,
VIDEO, RTPS, FTP, HTTP, TELNET, SMTP, SNMP, All-IP, Non-IP, or All.
Enter the minimum-to-maximum range of VLAN IDs from 0-4094 (applicable only in
Managed Switch Mode).
Enter the Type of Service.
Enter a Source IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Selection of Source/Destination Ports should only be done if you are aware of
the port usage of the desired protocol or application. There are well-known
ports for various protocols, but often only the 'command' messaging is transacted on
these ports and the 'data' is transferred through a negotiated port.
("Min/Max" page only) Assign a value to a flow to restrict the Minimum Bandwidth
that any particular flow will utilize; otherwise, the default of no bandwidth restriction
can be selected.
Assign a value to a flow to restrict the Maximum Bandwidth that any particular flow
will utilize; otherwise, the default of no bandwidth restriction can be selected.
7–50
CDM-425 Advanced Satellite Modem
Description
Revision 0
MN-CDM-425
Advertisement
Table of Contents
