Table of Contents
Advertisement
•
Query Response Interval: This is the maximum response time inserted into the periodic
general queries. By varying the Query Response Interval, a modem administrator may
tune the "burstiness" of IGMP messages on the subnet; note that larger values make the
traffic less "bursty" as host responses are spread out over a large interval.
Enter a value, in seconds, from 1 to 25 (default = 10 seconds).
Click [Submit] to save.
IGMP Joined Groups
This read-only table lists the IGMP Groups that are active on the modem. This allows you to
determine which services are being used and the minimum time before a service will be
terminated.
Click [Refresh] to update this section with its latest available statistics.
Multicast Routes
This read-only table lists the Multicast Routes that are active on the modem.
Click [Refresh] to update this section with its latest available statistics.
Ethernet-based Remote Product Management
The number of seconds assigned to the Query Response Interval must
be less than the Query Interval.
CDM-425 Advanced Satellite Modem
7–43
Revision 0
MN-CDM-425
Advertisement
Table of Contents
