Table of Contents
Advertisement
Command
Number of
Parameter
(Instruction
Arguments
& Qualifier)
BUC
N/A
4 bytes
Temperature
BUC
N/A
1 byte,
Phase Lock
0 or 1
Loop
BUC Software
N/A
2 bytes
Version
BUC
N/A
2 bytes
Power Class
Serial Remote Control
Description of Arguments
Query only.
Returns BUCTemperature in the form sxxx, where:
s=sign (+ or –)
xxx=value
NOTE: This query is only valid when the FSK and BUC power are turned On.
Query only.
Returns BUC phase lock loop in the form x, where:
0=Locked
1=Unlocked
NOTE: This query is only valid when the FSK is enabled.
Query only.
Returns BUC firmware version in the form xx, where:
xx=Value from 00 or 15.
NOTE: This query is only valid when the FSK and BUC power are turned On.
Query only.
Returns BUC Power Class in the form xx, where:
xx=Power Class, in watts.
NOTE: This query is only valid when the FSK is enabled.
EXAMPLE: <0/BPC? >0000/BPC=25
8–59
CDM-425 Advanced Satellite Modem
Revision 0
Query
Response to
(Instruction
Response to Query
Command
& Qualifier)
N/A
BUT?
BUT=sxxx
(see Description of
Arguments)
N/A
BPA?
BPA=x
(see Description of
Arguments)
N/A
BSV?
BSV=xx
(see Description of
Arguments)
N/A
BPC?
BPC=xx
(see Description of
Arguments)
MN-CDM-425
Advertisement
Table of Contents
