6.2.1.13.7 CONFIG: IP PktP-Enable
You may access this menu only when you have installed the optional IP Packet
Processor card.
Packet Processor: Enabled (Ena, Dis) ()
(Modem will auto-reboot after change!)
Use the ▲▼ arrow keys to select the card as Ena(bled) or Dis(abled):
•
The default mode is Ena(bled).
•
When you disable the IP Packet Processor, the card and its accompanying functionality
is completely bypassed and the modem reverts to its base modem Layer 2 switch
functionality.
Press ENTER. The modem will automatically reboot after this configuration change.
Front Panel Operation
CDM-425 Advanced Satellite Modem
6–73
Revision 0
MN-CDM-425