7.5.4.3.3
Configuration | Routing
The nested Routes, Internet Group Management Protocol (IGMP), and Dynamic
Host Configuration Protocol (DHCP) pages are accessible only to Admin users
and when you install and enable the optional IP Packet Processor card. See
Sect. 7.5.3.1 for complete details about using conditional access pages.
Click the Routes, IGMP, DHCP, or DNS tab to continue.
Configuration | Routing | Routes
Use this page to enter static routes into the IP Packet Processor to route IP traffic over the
satellite or to another device on the local LAN.
Ethernet-based Remote Product Management
Figure 7-19. Configuration | Routing | Routes Page
7–40
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0