Comtech EF Data CDM-425 Installation And Operation Manual page 677

CDM-425 Advanced Satellite Modem
Revision 0
Step Task
5
Use needle-nose pliers as needed to plug the fan power cable
receptacle (A) into the mating connector on the modem's framing
board (B).
IMPORTANT NOTE 1: Note the orientation of the fan's power
cable receptacle and wiring to the mating connector and its pins
on the modem's framing board.
IMPORTANT NOTE 2: Take care not to damage the pins for the
mating connector to the PL-0000481 IP Packet Processor Card.
Appendix J J–13 MN-CDM-425