Select: Info (Information) Menu Branch; Info: All; Info: Id - Comtech EF Data CDM-425 Installation And Operation Manual

6.2.4

SELECT: Info (Information) Menu Branch

Info: All ID
Drop
These read-only screens display the modem's current configuration information without risking
inadvertent changes. Use the ◄ ►arrow keys to select a parameter. Press ENTER.
After viewing any Info screen except All – Press ENTER or CLEAR to return to the previous
menu.
The display examples that follow are provided for reference only. The
information displayed on these screens will differ depending on your modem's
active configuration.
6.2.4.1

Info: All

All = Start
(Stop, Start)
Use this menu to scroll through and review configuration settings on a sequential basis. The
configuration displays are read-only – no editing is possible.
To view the configurations – Use the ▲▼ arrow keys to select between Stop and Start. Press
ENTER to continue through all the displays.
To discontinue viewing – Press CLEAR, use the ▲▼ arrow keys to select Stop. Press
ENTER.
6.2.4.2

Info: ID

----A TEST MESSAGE TO SHOW CIRCUIT ID---
This screen displays the 40-character, user-defined unit label, or Circuit ID string, that was
created using the Utility Circuit-ID menu. The Circuit ID also appears in the title bar of
compatible web browsers for easy unit identification.
Front Panel Operation
Mode Tx
Insert Remote
Modem Circuit ID:
6–88
CDM-425 Advanced Satellite Modem
Rx Clocks EDMAC
Alarm-Mask Misc
()
Revision 0
MN-CDM-425