Select: Odu Menu Branch (Summary Only); Select: Fast Menu Branch; Fast: Options; Fast: Options  View Options - Comtech EF Data CDM-425 Installation And Operation Manual

6.2.7

SELECT: ODU Menu Branch (Summary Only)

Chapter 10. OUTDOOR UNIT (ODU) (TRANSCEIVER, BUC, AND LNB)
OPERATION
ODU: BUC:PwrSupply+Ref
Depending on 70/140 MHz or L-Band operation: Use this menu branch to monitor and control a
standalone or redundant Comtech EF Data RF Transceiver (CSAT-5060 or KST-2000A/B) or
LPOD BUC, when connected. See Chapter 10. CDM-425 ODU (TRANSCEIVER, BUC, LNB)
OPERATION for complete details about this product-specific menu branch.
6.2.8

SELECT: FAST Menu Branch

FAST:
Baseboard S/N 123456789
FAST allows you to enable new options in the modem. Use the ◄ ►arrow keys to select
Options, Demo-Mode, or CnC. Press ENTER.
6.2.8.1

FAST: Options

FAST options:
Set Register1
You can access the FAST options via three separate internal EEPROM registers. Each register
requires its own FAST access code. Use the ◄ ►arrow keys to select View Options, Set
Register1, or Set Register2. Press ENTER.
6.2.8.1.1
FAST: View options: 01
Use the ▲▼ arrow keys to scroll through the available options. The modem identifies each
selected FAST option as "installed" or "not installed".
Front Panel Operation
LNB:PwrSupply+Ref
Options
View Options
Set Register2
FAST: Options  View Options
25 Mbps VersaFEC-2 CCM installed
CDM-425 Advanced Satellite Modem
FSK-control ()
Demo-Mode CnC
HW Rev3.0
6–101
Revision 0
()
()
MN-CDM-425