Comtech EF Data CDM-425 Installation And Operation Manual page 405

Hot
Key
J Access IP 3 Access Network Prefix
K Access IP 4 Access IP List Entry Enable
Be sure to include your system's IP Address in the Access IP Address list.
If you enter an invalid value in the Access Network Prefix, the CLI displays error message
"Number is out of range."
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Administration
submenu.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Function / Option Entry
Typical for each entry – Enter a value as follows:
Range 1 – Enter a value of 0
•
Range 2 – Enter a value from 8 to 32
•
Typical for each entry – Use ↑↓ arrow keys to set each list as
Enabled or Disabled
9–15
Revision 0
MN-CDM-425