Comtech EF Data CDM-425 Installation And Operation Manual page 374

Command
Number of
Parameter (Instruction
Arguments
& Qualifier)
...Equipment
ID (cont.)
Serial Remote Control
Description of Arguments
S=D&I option, where:
0=None
1=D&I,D&I++ for single port E1/T1
2=Option 1 plus Quad D&I (4 ports)
T=G.703 Clock Extension, where:
0=Not installed
1=installed on
U=Time based CnC option, where:
0=Not installed
1=Fractional CnC installed
2=Time Limited CnC installed
3=Option 1 and Option 2
V=Header Compression, where:
0=None
1=up to 5 Mbps / 2000ksps (ACM)
2=up to 10 Mbps / 4100ksps (ACM)
3=up to 15 Mbps / 8000ksps (ACM)
4=up to 20 Mbps / 12500ksps (ACM)
5=up to 25 Mbps / 12500ksps (ACM)
W=Payload Compression, where:
0=None
1=up to 5 Mbps / 2000ksps (ACM)
2=up to 10 Mbps / 4100ksps (ACM)
3=up to 15 Mbps / 8000ksps (ACM)
4=up to 20 Mbps / 12500ksps (ACM)
5=up to 25 Mbps / 12500ksps (ACM)
X=Advanced QoS, where:
0=Not installed
1=Installed
Y=AES Encryption, where:
0=Not installed
1=Installed
Z=Advanced NetworkTiming, where:
0=Not installed
1=Installed
a=Carrier ID, where:
0=Not installed
1=Installed
b=CnC Activation, where:
0=Not installed
1=Installed
c=VersaFEC-2 CCM data rate option, where:
0=Base, up to 5 Mbps
1=up to 10 Mbps
2=up to 15 Mbps
3=up to 20 Mbps
4=up to 25 Mbps
8–50
CDM-425 Advanced Satellite Modem
Revision 0
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
MN-CDM-425