6.2.1.10 Config: Misc; Config: Misc  G.703-Linecode (Ternary Code) - Comtech EF Data CDM-425 Installation And Operation Manual

6.2.1.10 CONFIG: Misc

Misc:
MEO
Use the ◄ ►arrow keys to select a parameter. Press ENTER.
6.2.1.10.1 CONFIG: Misc  G.703-LineCode (Ternary Code)
This menu is functional only when the Data Interface Type is G.703.
Tx G.703/DDO Code= AMI
Rx G.703/IDI Code= AMI
The selections displayed here depend on the selected G.703 interface type. Use the ◄ ►arrow
keys to select either the G.703 Tx or Rx Ternary Code, and then use the ▲▼ arrow keys to
select the desired code. Press ENTER.
Valid selections are:
Setting
HDB3
B8ZS
AMI
Front Panel Operation
G.703-LineCode
E1 or sub-rate operation (European standard)
T1
Alternate Mark Inversion operation (North American standard)
CDM-425 Advanced Satellite Modem
RTS Warm Up
(AMI,B8ZS)
(AMI,B8ZS) ()
For:
6–45
Revision 0
Stats
()
MN-CDM-425