Table of Contents
Advertisement
7.5.2
HTTP Interface – Operational Features
7.5.2.1
Navigation
This interface features navigation tabs located at the top of
each page. After you click a navigation tab, you may click an
available primary page tab. In turn, any nested tabs appear
for further selection.
This manual uses a naming format for all pages to indicate
the depth of navigation needed to view the subject page:
"Top Level Tab | Primary Page Tab | Nested Tab".
For example: "Admin | Firmware | Base Modem" is interpreted to mean "first click the top-level
'Admin' navigation tab; then, click the 'Firmware' primary page tab; finally, click the nested 'Base
Modem' tab."
7.5.2.2
Page Sections
Each page features one or more sections. The title at the
upper-left corner of each page or page section describes its
operational features. Each section can feature editable
fields, action buttons, and read-only displays for a specific
function.
This manual explains the purpose and operation for each Web page on a per-page, per-section
basis.
7.5.2.3
Action Buttons
Action buttons are important in the HTTP Interface.
Click an action button to do one of these tasks:
•
Refresh the page with current data.
•
Reset changed parameters to remove unsaved
changes.
•
Submit (permanently save) changes.
If you edit a field, make sure to click the action button before you leave the
page. If you go to another page without first clicking the action button, your
changes are not saved.
7.5.2.4
Drop-down Lists
A drop-down list lets you choose from a list of selections. Left-
click the drop-down button to open the list. Then, left-click on
an item to select that choice.
Ethernet-based Remote Product Management
CDM-425 Advanced Satellite Modem
7–10
Revision 0
MN-CDM-425
Advertisement
Table of Contents
