Part Names And Functions; Operation Parts - Fuji Electric Micro Control X Instruction Manual

5-1. Part names and functions

Operation parts

USER key
SEL key
USER +
USER +
PXF5
(5)
(4)
(6)
(7)
(8)
(11)
(12)
(9) (18)
PXF9
(4) (5)
(11)
(10)
(13)
(14)
(15)
(12)
key
key
key
(1)
(16)
(2)
(10)
(3)
(17)
(13)
(14)
(15)
(6) (7) (8)
(9) (3) (18)
Press this key once in operation control mode, channel-selection mode, or setup mode to return to
Press this key once in operation mode to move to operation control mode.
Press and hold this key in operation mode to move to channel selection mode.
Press this key once in channel selection mode to move to setup mode.
Press and hold this key in setup mode to move to channel selection mode.
Press this key once in parameter selection submode of setup mode to enter parameter editing
submode.
Press this key once in parameter editing submode to save the change and return to parameter
selection submode.
Use this key to select the digit when changing values.
key
Press this key in operation control mode, channel selection mode, or setup mode, to change
parameters to be displayed.
Use this key to edit parameter when in parameter setting submode.
Indicates process value. Shows parameter name when in parameter setting.
Shows set point. Shows parameter set value when in parameter setting.
(3) Screen No.
(4) OUT 1 indicator
(5) OUT 2 indicator
(7) STBY indicator
(8) MANU indicator
(10) No. indicator
(12) AT indicator
(13) MV indicator
(14) TM indicator
(1)
(15) RMN indicator
(16)
Shows the temperature unit under use.
(2)
Shows the unit being applied to values on SV screen during the operation mode.
(17)
- 6 -