Overview Of @E.terminal For Mc - Fuji Electric FEH300b Hardware User Manual

The @E.Terminal for MC Display Attached Controller is an all-in-one programmable operation display and motion controller.
Features:
1) The guidance function of the display screen allows you to easily set up parameters and positioning data
previously set up by a dedicated machine.
Also, it enables easy equipment maintenance.
2) The SX bus allows one-touch connection of up to eight servo amplifiers (axes) (FALDIC- and APLHA5 VS
type), minimizing the need for wires.
3) The upper level controller can be connected by Ethernet and the like.
4) The lineup includes three different display screen sizes. 8 inch, 10 inch and 12 inch models are available.
5) The content corresponding to motion is supplied in the standard package.
Content for PTP control and synchronous control (ratio synchronization, cycle synchronization, flying shear, and
rotary shear) are provided.
Motion functions
(Setting/Display)
Note: The SX bus is a MICREX-SX series dedicated high-speed serial bus.

1-1 Overview of @E.Terminal for MC

Ethernet, ctc.
SX bus Note)
1-1
Section 1 General
@E.Terminal for MC
Contents for motion control
• Screen data
• Controller built-in software