Type Stack Master-Fail - Allied Telesis x310-26FT Command Reference Manual

T C
RIGGER OMMANDS
-
TYPE STACK MASTER FAIL

type stack master-fail

Overview This command (configured to the stack) initiates the action of a pre-configured
trigger to occur when the stack enters the fail-over state.
type stack master-fail
Syntax
Mode Trigger Configuration
To configure trigger 86 to activate when stack master fail-over event occurs, use
Example
the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related stack disabled-master-monitoring
Commands
trigger
type stack disabled-master
type stack member
type stack link
C613-50103-01 REV A
configure terminal
trigger 86
type stack master-fail
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2475