Ping-Polling Commands; Introduction; Chapter 60: Ping-Polling Commands - Allied Telesis x310-26FT Command Reference Manual

60

Introduction

This chapter provides an alphabetical reference for commands used to configure
Ping Polling. For more information, see the
Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Table 60-1: The following table lists the default values when configuring a ping
Command List •
•
•
•
C613-50103-01 REV A
Guide.
poll
Default
Critical-interval
Description
Fail-count
Length
Normal-interval
Sample-size
Source-ip
Time-out
Up-count
"active (ping-polling)" on page 2482
"clear ping-poll" on page 2483
"critical-interval" on page 2484
"debug ping-poll" on page 2485
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Ping-Polling
Commands
Ping Polling Feature Overview and
Value
1 second
No description
5
32 bytes
30 seconds
5
The IP address of the interface from which the ping packets are
transmitted
1 second
30
"Getting Started
Guide.
2480