Show Ping-Poll - Allied Telesis x310-26FT Command Reference Manual

P -P C
ING OLLING OMMANDS
-
SHOW PING POLL

show ping-poll

Overview This command displays the settings and status of ping polls.
show ping-poll [<1-100>|state {up|down}] [brief]
Syntax
Mode User Exec and Privileged Exec
Output Figure 60-2: Example output from the show ping-poll brief command
Table 62: Parameters in output of the show ping-poll brief command
C613-50103-01 REV A
Parameter Description
<1-100>
Displays settings and status for the specified polling instance.
state
Displays polling instances based on whether the device they are
polling is currently reachable or unreachable.
up
down
brief
Displays a summary of the state of ping polls, and the devices they
are polling.
Ping Poll Configuration
----------------------------------------------------------
Id Enabled State Destination
----------------------------------------------------------
1 Yes Down 192.168.0.1
2 Yes Up 192.168.0.100
Parameter Meaning
Id The ID number of the polling instance, set when creating the polling
instance with the
Enabled Whether the polling instance is enabled or disabled.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Displays polling instance where the device state is
reachable.
Displays polling instances where the device state is
unreachable.
ping-poll command.
2496