Trigger Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

59

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
Triggers. For more information, see the
Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

Trigger Commands

Guide.
"active (trigger)" on page 2443
"day" on page 2444
"debug trigger" on page 2446
"description (trigger)" on page 2447
"repeat" on page 2448
"script" on page 2449
"show debugging trigger" on page 2451
"show running-config
"show trigger" on page 2453
"test" on page 2458
"time (trigger)" on page 2459
"trap" on page 2461
"trigger" on page 2462
"trigger activate" on page 2463
"type atmf node" on page 2464
"type cpu" on page 2467
"type interface" on page 2468
"type memory" on page 2469
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Triggers Feature Overview and
trigger" on page 2452
"Getting Started
Guide.
2441