S1700 Managed Series Ethernet Switches
Web User Manual
Item
Start-stop
RADIUS
Method 1
AAA Accounting Exec
Name
Method 1 / Method 2
Active / Inactive
Configure
Add the Accounting Exec
Step 1 Click Security > AAA.
Step 2 Click Accounting Settings in Tab.
Step 3 Set the parameters in AAA Accounting Exec section.
Step 4 Click Apply button to apply all the changes made.
Step 5 Click the check box of AAA Accounting Exec list on left side, and then click Active button.
----End
9.14 RADIUS
9.14.1 RADIUS Global Settings
Click Security > RADIUS > RADIUS Global Settings, the configuration page is displayed as
follows.
Issue 05 (2012-10-25)
Description
Group
Enable / Disable AAA Network Accounting.
Accounting options are as follow:
none: not necessary to account the data accessed by users.
RADIUS: the switch will send accounting message to RADIUS
server which is used to account the data accessed by users.
Enter the method list name for AAA switch access accounting.
You can choose a variety of authentication methods, but only
method 1 (not method 2) can match the None accounting method.
In practice, the accounting order is from method 1 to method 2. It
will go to the next accounting method only when the present
accounting invalids. The accounting options are as follow:
none: not necessary to account the data accessed by users.
group: the switch will send accounting message to RADIUS server
which is used to account the data accessed by users.
RADIUS: the switch will send accounting packets to the RADIUS
server which is used to account the data accessed by users.
Select a method list entry in switch access accounting list, and then
click this button to activate / inactivate the accounting.
Select a method list entry in switch access accounting list, and then
click this button to configure this accounting method.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
168