Display User-Interface - Huawei Quidway S3900 series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display telnet source-ip command to display the source IP address
configured for the switch operating as the Telnet client. If the source interface is also
configured for the switch, this command displays the IP address of the source interface.
If no source address is configured, 0.0.0.0 is displayed.
Example
# Display the source IP address configured for the switch operating as the Telnet client.
<Quidway> display telnet source-ip
The source IP you specified is 192.168.1.1

1.1.6 display user-interface

Syntax
display user-interface [ type number | number ] [ summary ]
View
Any view
Parameter
type: User interface type.
number: User interface number.
summary: Displays the summary information about a user interface.
Description
Use the display user-interface command to display the information about a specified
user interface or all user interfaces. If the summary keyword is not specified, this
command displays user interface type, absolute/relative user interface number,
transmission speed, available command level, authentication mode, and physical
position. If the summary keyword is specified, this command displays the number and
type of the user interfaces, including those that are in use and those that are not in use.
Example
# Display the information about user interface 0.
<Quidway> display user-interface 0
Idx Type
F 0 AUX 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Tx/Rx Modem Privi Auth
9600 - 3
Huawei Technologies Proprietary
1-5
Chapter 1 Login Commands
Int
N -