Chapter 1 802.1X Configuration Commands; Configuration Commands; Display Dot1X - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches

Chapter 1 802.1x Configuration Commands

1.1 802.1x Configuration Commands

1.1.1 display dot1x

Syntax
display dot1x [ sessions |statistics] [ interface interface-list ]
View
Any view
Parameter
sessions: Configures to display the session connection information of 802.1x.
statistics: Configures to display the relevant statistics information of 802.1x.
interface: Configures to display the 802.1x information on the specified interface.
interface-list: Ethernet interface list including several Ethernet interfaces, expressed in
the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >.
interface-num specifies a single Ethernet interface in the format interface-num =
{ interface-type interface-num | interface-name }, where interface-type specifies the
interface type, interface-num specifies the interface number and interface-name
specifies the interface name. For the respective meanings and value ranges, read the
Parameter of the Port Command Manual section.
Description
Using display dot1x command, you can view the relevant information of 802.1x,
including configuration information, running state (session connection information) and
relevant statistics information.
By default, all the relevant 802.1x information about each interface will be displayed.
This command can be used to display the following information on the specified
interface: 802.1x configuration, state or statistics. If no port is specified when executing
this command, the system will display all 802.1x related information. For example,
802.1x configuration of all ports, 802.1x session connection information, and 802.1x
data statistical information. The output information of this command can help the user
to verify the current 802.1x configurations so as to troubleshoot 802.1x .
For the related commands, see reset dot1x statistics, dot1x, dot1x retry, dot1x
max-user, dot1x port-control, dot1x port-method, dot1x timer.
Chapter 1 802.1x Configuration Commands
1-1