User Privilege Level - Huawei Quidway S3900 series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510

1.1.30 user privilege level

Syntax
user privilege level level
undo user privilege level
View
User interface view
Parameter
level: Command level ranging from 0 to 3.
Description
Use the user privilege level command to configure the command level available to the
users logging into the user interface.
Use the undo user privilege level command to revert to the default command level.
By default, the commands of level 3 are available to the users logging into the AUX user
interface. The commands of level 0 are available to the users logging into VTY user
interfaces.
Example
# Configure that commands of level 0 are available to the users logging into VTY 0.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface vty 0
[Quidway-ui-vty0] user privilege level 0
# You can verify the above configuration by Telneting to VTY 0 and displaying the
available commands, as listed in the following.
<Quidway> ?
User view commands:
cluster
language-mode
nslookup
ping
quit
super
telnet
tracert
undo
Run cluster command
Specify the language environment
Query Internet name servers
Ping function
Exit from current command view
Set the current user priority level
Establish one Telnet connection
Trace route function
Cancel current setting
Huawei Technologies Proprietary
1-27
Chapter 1 Login Commands