Telnet Source-Interface; Telnet Source-Ip - Huawei Quidway S3900 series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] telnet-server source-ip 192.168.1.1

1.1.27 telnet source-interface

Syntax
telnet source-interface interface-type interface-number
undo telnet source-interface
View
System view
Parameter
interface-type: Type of the interface to be specified as the source interface.
interface-number: Number of the interface to be specified as the source interface.
Description
Use the telnet source-interface command to specify the source interface for a Telnet
client. If the interface specified does not exist, your configuration fails.
Use the undo telnet source-interface command to clear the source interface
configuration. After that, you can access the Telnet server from Telnet client using the
IP address determined by the system.
Example
# Specify VLAN-interface 2 as the source interface for the Telnet client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] telnet source-interface Vlan-interface 2

1.1.28 telnet source-ip

Syntax
telnet source-ip ip-address
undo telnet source-ip
View
System view
Parameter
ip-address: Source IP address to set.
Huawei Technologies Proprietary
1-25
Chapter 1 Login Commands