Huawei Quidway S3900 series Command Manual page 46

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
2.1.4 snmp-agent community
Syntax
snmp-agent community { read | write } community-name [ [ mib-view view-name ] |
[ acl acl-number ] ]*
undo snmp-agent community community-name
View
System view
Parameter
read: Specifies that the community has read-only permission in the specified view.
Write: Specifies that the community has read/write permission in the specified view.
community-name: Community name.
mib-view: Sets the name of the MIB view accessible to the community.
view-name: MIB view name.
acl acl-number: Specifies the ACL number. The acl-number argument ranges from
2,000 to 2,999.
Description
Use the snmp-agent community command to set a community name and to enable
users to access the switch through SNMP. You can also optionally use this command to
apply an ACL to filter network management users.
Use the undo snmp-agent community command to cancel community-related
configuration for the specified community.
By default, SNMPv1 and SNMPv2c access a switch by community names.
Example
# Set the community name to "h123", enable users to access the switch in the name of
the community (with read-only permission), and apply ACL 2,000 to filter network
management users (assuming that ACL 2000 already exists.)
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent community read h123 acl 2000
2.1.5 snmp-agent group
Syntax
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
Huawei Technologies Proprietary
2-3
Chapter 2 Commands for User Control