Display Telnet-Server Source-Ip; Display Telnet Source-Ip - Huawei Quidway S3900 series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Set the data bits to 7.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface aux 0
[Quidway-ui-aux0] databits 7

1.1.4 display telnet-server source-ip

Syntax
display telnet-server source-ip
View
Any view
Parameter
None
Description
Use the display telnet-server source-ip command to display the source IP address
configured for the switch operating as the Telnet server. If the source interface is also
configured for the switch, this command displays the IP address of the source interface.
If no source IP address is specified, 0.0.0.0 is displayed.
Example
# Display the source IP address configured for the switch operating as the Telnet
server.
<Quidway> display telnet-server source-ip
The source IP you specified is 192.168.1.1

1.1.5 display telnet source-ip

Syntax
display telnet source-ip
View
Any view
Parameter
None
Huawei Technologies Proprietary
1-4
Chapter 1 Login Commands