Sysname - Huawei Quidway S3900 series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
Changing the value of the stop bits does not affect the communications.
Example
# Set the stop bits to 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface aux 0
[Quidway-ui-aux0] stopbits 2

1.1.23 sysname

Syntax
sysname string
undo sysname
View
System view
Parameter
string: Domain name of the switch. This argument can contain 1 to 30 characters and
defaults to "Quidway".
Description
Use the sysname command to set a domain name for the switch.
Use the undo sysname command to revert to the default domain name.
The CLI prompt reflects the domain name of a switch. For example, if the domain name
of a switch is "Quidway", then the prompt of user view is <Quidway>.
Example
# Set the domain name of the switch to "ABC".
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] sysname ABC
[ABC]
Huawei Technologies Proprietary
1-22
Chapter 1 Login Commands