Huawei Quidway S3900 series Command Manual page 26

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
h
When you log in the next time, "hello" and "my friend !" is displayed respectively in two
lines as the banner. The beginning character "h" appears in the banner.
Enter the banner in a single line. You can also specify the banner in a single line. In
this case, the banner does contain the beginning and the end character. The
following is an example.
[Quidway] header shell 0welcome,my friend!0
When you log in the next time, "welcome, my friend!" is displayed as the banner.
Example
# Set the session banner.
Option 1: Enter the banner in the same line as the command.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] header shell %SHELL: Hello! Welcome%
(Make sure the beginning and end characters of the banner are the same.)
When you log in the next time, the session banner appears on the terminal as the
following:
[Quidway] quit
<Quidway> quit
Please press ENTER
SHELL: Hello! Welcome
(The beginning and end characters of the banner are not displayed.)
<Quidway>
Option 2: Enter the banner in multiple lines.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] header shell %SHELL:
(Following appears after you press <Enter>:)
Input banner text, and quit with the character '%'.
Continue entering the banner and end the banner with the character identical with the
beginning character of the banner.
Hello! Welcome %
(Press <Enter>.)
[Quidway]
When you log in the next time, the session banner appears on the terminal as the
following:
Huawei Technologies Proprietary
1-10
Chapter 1 Login Commands