Lp System Logs Screen Messages; Error Level - Hitachi CB 520H A1 User Manual

Message Content
Explanation
LPAR manager
operation
What to do
If an error message other than those described above, contact your reseller
or consult maintenance personnel.

LP system logs Screen Messages

The following lists the LP system logs screen messages displayed on the LP
system logs screen.
Error
Warn
Info

Error Level

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
No VLAN ID is set in the LPAR manager system. No information
can be displayed.
Aborts the specified process.
Verify the setting of the network segment identifier, which is
specified to display.
Level
Indicates Error Messages. Failure occurred on the LPAR manager.
Indicates Warning Messages. It's not a failure. However it should
be taken care.
Indicates Information Messages. It's not a noticeable
phenomenon.
Synchronization was terminated due to abnormal time difference
detection during periodic synchronization for the time using NTP.
Take action as follows:
• Check the status of the NTP server.
• If there is no problem with the NTP server, disable time
synchronization in the Date and Time screen, and set the
original values to restart time synchronization.
• Check the LPAR manager system time and OS system time.
Then, if necessary, use an OS command or Adjust LPAR Time
to set the logical RTC time of the LPAR.
An error-level event occurred on the LPAR manager.
See the adjacent LPAR manager system log, which is described in
the details of this event.
VLAN ID is not set.
Explanation
An abnormal time difference was detected.
An error-level event occurred on the LP.
Messages
9-27