Lp System Logs Screen Messages; Error Level - Hitachi Compute Blade 500 Series User Manual

Message Content
Explanation
LPAR manager
operation
What to do
If an error message other than those described above, contact your reseller
or consult maintenance personnel.

LP system logs Screen Messages

The following lists the LP system logs screen messages displayed on the LP
system logs screen.
Error
Warn
Info

Error Level

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
9-24
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
No VLAN ID is set in the LPAR manager system. No information
can be displayed.
Aborts the specified process.
Verify the setting of the network segment identifier, which is
specified to display.
Level
Indicates Error Messages. Failure occurred on the LPAR manager.
Indicates Warning Messages. It's not a failure. However it should
be taken care.
Indicates Information Messages. It's not a noticeable
phenomenon.
Synchronization was terminated due to abnormal time difference
detection during periodic synchronization for the time using NTP.
Disable NTP on the Date and Time screen, and confirm the NTP
server status. If there is no problem, enable NTP again. Confirm
the logical RTC time of LPAR on the LPAR manager screen, set the
logical RTC time of LPAR as needed using the OS command or
Adjust LPAR Time.
The message of "LP damage occurred." is also detected with this
message.
Dmar fault occurred.
Contact your reseller or maintenance personnel.
A guest watchdog timer timeout was detected.
VLAN ID is not set.
Explanation
An abnormal time difference was detected.
Dmar Fault occurred.
Guest, Watchdog timer has expired.
Messages