Match Source-Protocol - Dell C9000 Series Reference Manual

Version
9.8(0.0)
9.7(0.0)
Usage Information It is possible to configure multiple import conditions per VRF depending on the
exporting VRF.
The export-target and import-target support only the match protocol and match
prefix-list options. Other options that are configured in the route-maps are ignored.
Related ipv6 route-export
Commands

match source-protocol

Specify matching criteria while exporting or importing routes.
C9000 Series
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp
isis
ospf
connected
static
Command Modes ROUTE MAP MODE
Command History
Version
9.9(0.0)
9.8(0.0)
Description
Introduced on the S3048-ON and S4048-ON.
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
and Z9500.
– exports IPv6 routes to another VRF.
Enter the keyword bgp to leak or share routes corresponding to
the BGP protocol.
Enter the keyword isis to leak or share routes corresponding to
the ISIS protocol.
Enter the keyword ospf to leak or share routes corresponding to
the OSPF protocol.
Enter the keyword connected to leak or share connected routes
corresponding to the VRF.
Enter the keyword static to leak or share static routes
corresponding to the VRF.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Virtual Routing and Forwarding (VRF) 2271