Avaya S8700 Maintenance Manual page 2598

Maintenance-Object Repair Procedures
Error Log Entries and Test to Clear Values
Table 8-721. Common Port Circuit Pack Maintenance Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1 (a) 0 Circuit pack removed or
SAKI Sanity test (#53)
18 (b) 0 busyout board UUCSS
23(c) 0 None
36 (d) 4368 none
125 (e) None
217 (f) 0 None
257 65535 Control Channel test
(#52)
267 (f) 0 None
513 (h) Any None
769 (i) 4358 None
1025 (j) 4363 NPE Audit test (#50)
1281 (k) Ringing Application test
(#51)
1538 (l) Any None
1793 (m) Neon test (#220)
3840 (n) Any None
3999 (o) Any None
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. Error type 1 indicates the circuit pack has stopped functioning or has been
physically removed from the system. This error type does not apply to
ANN-BD, DETR-BD, S-SYN-BD, M/T-BD, or CLSFY-BD. The alarm is
logged approximately 11 minutes after removal of the circuit pack or failure
of the SAKI Sanity test (#53).
Check for the physical presence of the circuit pack in the slot indicated by
the alarm. If the circuit pack is absent, insert one of the proper type. If the
circuit pack is present and its red LED is lit, see
Log Entry or with Error Type 1'' on page
b. This error indicates the circuit pack has been busied out. Release the
circuit pack via release board UUCSS.
8-1876 Issue 1 May 2002
Alarm On/Off
Level Board Test to Clear Value
Any Any test board UUCSS sh r 1
MINOR ON
WARNING OFF release board UUCSS
WARNING OFF
MINOR ON
WARNING ON
MINOR ON test board UUCSS sh r
20
WARNING ON
MINOR ON test board UUCSS sh
test board UUCSS l r 20
MINOR ON test board UUCSS r 2
WARNING ON
MINOR
MINOR ON test board UUCSS r 2
''LED Alarms without Alarm
6-5.
555-233-143